220v 433mhz Single Channel 2-button Wireless Remote Control Switch Interlock Self-locking

Description

1Clear function. Press and hold the learning button 2Pairing code function. Press the learning button 3Test the code. After the code is successful， press the corresponding relay of the remote control to make the corresponding function action. 4The wireless remote control switch can store 16 different remote controls. This is a one-key pairing code， the program will automatically allocate the data bits. 5Excellent quality and durability.Features:1. Clear function. Press and hold the learning button "KEY" for about 4 seconds， let go when the LED indicator goes out， and then it clears all the remote control code data in the memory.After the indicator flashes 5 times and then goes off， the clear function is completed.2. Pairing code function. Press the learning button "KEY"， the LED indicator lights up to indicate that the microprocessor enters the learning pairing code state. Press the matching wireless remote control button， after the LED indicator flashes 3 times and then goes out， the code is successful.3. Test the code. After the code is successful， press the corresponding relay of the remote control to make the corresponding function action.4. The wireless remote control switch can store 16 different remote controls. This is a one-key pairing code， the program will automatically allocate the data bits.5. Excellent quality and durability.Specifications:Model: 220V single channel 2-button remote control switchWeight: 87gSize: Approx. 8*4*2.2cm/3.15*1.57*0.87inType: Single remote control switchWorking voltage: AC220V 50/60HZWorking frequency: 433.92MHZQuiescent current: 8.5mALoad power: 1100WBattery: 12V23A * 2(Included)Receive sensitivity: -105dBMWorking mode: jog， interlock， self-lockingOutput signal: can output one switch signal or one AC220V voltage signalCoding method: learning codeModulation method: ASKWorking temperature: -10~+70Wiring and testing:1. Correctly regulate the wiring according to the control function you need. After the wiring is completed， check if the wiring is correct.2. After confirming that the wiring is correct， turn on the power and the LED indicator will flash. The number of flashes can determine the selection function.1 * flashing - jog function2 * flashes - self-locking function3 * flashes - interlock function3. Press the remote control button of the code， and the remote control switch controls the corresponding control. If the control is normally operated， it means that the wiring test is successful and can be used normally.Package List:1 * Remote Control Switch2 * Remote Control

• Brand: Waoniq
• Category: Remote Control Motorcycles

• Fruugo ID: 194296994-414543661
• EAN: 546232716444
• Sold by: Shenzhenshishuerwenkejiyouxiangongsi